Your flight controller does not have a compatible dataflash chip available

Your flight controller does not have an integrated BetaFlight OSD

The amount of available ESCs does not match what the flight controller is reporting

Your flight controller's firmware does not support Blackbox logging

Your flight controller's firmware does not support transponder functionality

flight controller's onboard dataflash chip

Your device seems to be not compatible

No dataflash chip found

Onboard dataflash chip

Plug in your FC to your computer, but do NOT connect to betaflight configurator

proportional–integral–derivative controller (PID controller / three-term controller)

target does not develop

Supplied image is larger then flash available on the chip!

Welcome to Betaflight - Configurator, a utility designed to simplify updating, configuring and tuning of your flight controller

When you enabled 3D mode in your flight controller, make sure the ESCs are also set up for 3D mode, otherwise the motors might go off with full power

Your flight controller isn't responding to OSD commands

Your flight controller's firmware is too old to support this tab

Available applications on your device

when GPS Rescue is not available and cannot be activated

data might not have been written correctly

Voltage and/or amperage meter sources have been changed but not saved

File name not found in hex file, check your hex file version!

Not matching MCU type, check your hex file!

Mass storage mode can not be activated because the storage device is not ready

Prearm switch is not activated or prearm has not been toggled after disarm

This method allows you to flash your module while it is connected to your transmitter by using the passthrough feature

This operation is not supported by your hardware

terminal attack controller (TAC) (= forward air controller)

optimally compatible land use

man-compatible

cross-compatible

Confirm dataflash erase

Dataflash free space