Your flight controller isn't responding to OSD commands

Your flight controller does not have an integrated BetaFlight OSD

proportional–integral–derivative controller (PID controller / three-term controller)

Welcome to Betaflight - Configurator, a utility designed to simplify updating, configuring and tuning of your flight controller

When you enabled 3D mode in your flight controller, make sure the ESCs are also set up for 3D mode, otherwise the motors might go off with full power

Your flight controller does not have a compatible dataflash chip available

Your flight controller's firmware does not support Blackbox logging

Your flight controller's firmware does not support transponder functionality

Your flight controller's firmware is too old to support this tab

Plug in your FC to your computer, but do NOT connect to betaflight configurator

This method allows you to flash your module while it is connected to your transmitter by using the passthrough feature

terminal attack controller (TAC) (= forward air controller)

subordinate unified commands

disrupt commands

bi-strategic command (Bi-SC) (of the two Strategic Commands )

Review the loaded commands

review and edit commands before execution

Set this option to X and your receiver will work with flight controllers

Select your flight controllers serial device below

flight controller (FC)

Beep when flight controller is powered from USB

Bind request sent to the flight controller

Flight controller info

Flight Controller Loop Time

Flight controller set Profile X

flight controller software

flight controller's onboard dataflash chip

Flight controller firmware has to support this feature.

Loading current configuration from the flight controller

reconnect flight controller

The amount of available ESCs does not match what the flight controller is reporting

Office of the Secretary of Defense (OSD)

on screen display (OSD)