Your device seems to be not compatible

Схоже, пристрій не є сумісним

Your flight controller does not have a compatible dataflash chip available

Plug in your FC to your computer, but do NOT connect to betaflight configurator

Mass storage mode can not be activated because the storage device is not ready

Reset device options to the recommended defaults on this device target. Except for your custom binding phrase

ESC seems to be locked

Firmware is tagged as X but actualy seems to be Y

Prearm switch is not activated or prearm has not been toggled after disarm

File name not found in hex file, check your hex file version!

Not matching MCU type, check your hex file!

This operation is not supported by your hardware

Your flight controller does not have an integrated BetaFlight OSD

Your flight controller's firmware does not support Blackbox logging

Your flight controller's firmware does not support transponder functionality

This method allows you to flash your module while it is connected to your transmitter by using the passthrough feature

optimally compatible land use

cross-compatible

Firmware image contains addresses not found on target device

Available applications on your device

select your desired device options

Select your flight controllers serial device below

You must update your device's webview in order to use the configurator

safety and arming device / safety-and-arming device

air intake device / air-intake device

do not answer - out

separable but not separate

not later than (NLT)

not be able to get (someone) on the comms

almost certainly not