This operation is not supported by your hardware

Plug in your FC to your computer, but do NOT connect to betaflight configurator

Testing the application on your hardware

Battery/Amperage/Voltage configurations using API 1.33.0 (Betaflight release = 3.17) is not supported.

Serial port configurations of firmware is not supported

is not supported

is not yet supported

Layout revision is not yet supported

Non - Betaflight firmware is not supported, except for CLI mode

This defines the number of power levels supported by your VTX

You can select here the frequency for your VTX if it is supported

File name not found in hex file, check your hex file version!

Not matching MCU type, check your hex file!

Mass storage mode can not be activated because the storage device is not ready

Prearm switch is not activated or prearm has not been toggled after disarm

This method allows you to flash your module while it is connected to your transmitter by using the passthrough feature

Your device seems to be not compatible

Your flight controller does not have a compatible dataflash chip available

Your flight controller does not have an integrated BetaFlight OSD

Your flight controller's firmware does not support Blackbox logging

Your flight controller's firmware does not support transponder functionality

intelligence-supported operation

GPS hardware

procurement of materiel / military hardware

hardware redundancy testing

Functional Hardware and Software Contour (FHSC)

hardware

towing hardware

flaunt captured hardware

drone hardware

hardware in the loop (HIL)

chest hardware

Disable the hardware ADC filter in the Transmitter