You need to upgrade your firmware to the latest version of Betaflight before you can use the X tab

You need to connect before you can view any of the tabs

Make sure you are using the latest firmware Betaflight X or newer

You will always find the latest stable version here

use the latest firmware!

Plug in your FC to your computer, but do NOT connect to betaflight configurator

Make sure you've taken the propellers OFF before doing anything on this tab

Select firmware version for your board

Shows GPS info, if proper activated in Ports tab, Configuration Tab and GPS tab

You can select here the band for your VTX

You can select here the channel for your VTX

You can select here the frequency for your VTX if it is supported

This method allows you to flash your module while it is connected to your transmitter by using the passthrough feature

Your flight controller's firmware is too old to support this tab

You must update your device's webview in order to use the configurator

Latest Drivers can be downloaded from (here)

Only flash firmware if you are fully aware what you are doing.

The Betaflight wiki can be found <a "docs/wiki" >here

Listen Before Talk (LBT) / Listen Before Transmit

Welcome to Betaflight - Configurator, a utility designed to simplify updating, configuring and tuning of your flight controller

Your flight controller does not have an integrated BetaFlight OSD

Use Betaflight to enable the improved configuration panel

Firmware upgrade required

Non - Betaflight firmware is not supported, except for CLI mode

Device Firmware Upgrade Mode

via the Devices Firmware Upgrade mode

Read the release notes to understand what changed and what you might need to adjust

You need to connect first

fix these problems before attempting to fly your craft

File name not found in hex file, check your hex file version!

can-for-can method

Choose a Firmware version

Choose a Firmware version for