Select firmware version for your board

Select the correct firmware appropriate for your board

select a firmware version first

You need to upgrade your firmware to the latest version of Betaflight before you can use the X tab

Select or auto-detect your board

Select Version

File name not found in hex file, check your hex file version!

Choose a Firmware version

Choose a Firmware version for

Firmware version

Current firmware version is X

Picked preset requires firmware version X

There is a newer version of the firmware available

Virtual Firmware Version

select a motor output protocol appropriate for your ESCs

select your desired device options

Select your flight controllers serial device below

You can select here the band for your VTX

You can select here the channel for your VTX

You can select here the frequency for your VTX if it is supported

Board X, version Y

Plug in your FC to your computer, but do NOT connect to betaflight configurator

This method allows you to flash your module while it is connected to your transmitter by using the passthrough feature

Select Firmware

Flashing inappropriate firmware may damage your ESC

Your flight controller's firmware does not support Blackbox logging

Your flight controller's firmware does not support transponder functionality

Your flight controller's firmware is too old to support this tab

Choose a Firmware / Board

Query board information to preselect right firmware

on-board digital computer / on-board computer

Warning beeps when board is armed with motors off when idle (repeats until board is disarmed or throttle is increased)

version