Make sure you are using the latest firmware Betaflight X or newer

You need to upgrade your firmware to the latest version of Betaflight before you can use the X tab

Make sure you've taken the propellers OFF before doing anything on this tab

When you enabled 3D mode in your flight controller, make sure the ESCs are also set up for 3D mode, otherwise the motors might go off with full power

Only flash firmware if you are fully aware what you are doing.

There is a newer version of the firmware available

Battery/Amperage/Voltage configurations using API 1.33.0 (Betaflight release = 3.17) is not supported.

You will always find the latest stable version here

use the latest firmware!

Make sure to update the Lua script on your radio

Make sure your ESCs are properly set up to reflect the state of the sliders

Make sure your motors spin up reliably on arm and in the correct direction

This method allows you to flash your module while it is connected to your transmitter by using the passthrough feature

Non - Betaflight firmware is not supported, except for CLI mode

you are / I read you…

You need to connect before you can view any of the tabs

latest arrival date (transit)

latest definition

Latest Drivers can be downloaded from (here)

sure-kill capability

sure-kill weapon

Sure

Betaflight documentation is available in release notes and wiki

Use Betaflight to enable the improved configuration panel

MSP connection is active with this Betaflight Configurator

no official Betaflight target was found

Plug in your FC to your computer, but do NOT connect to betaflight configurator

The Betaflight wiki can be found <a "docs/wiki" >here

Welcome to Betaflight - Configurator, a utility designed to simplify updating, configuring and tuning of your flight controller

Your flight controller does not have an integrated BetaFlight OSD

call for fire using `snail` grid reference

anti-aircraft fire using fire control equipment

on the verge of using nuclear weapons