Flight controller set Profile X

proportional–integral–derivative controller (PID controller / three-term controller)

When you enabled 3D mode in your flight controller, make sure the ESCs are also set up for 3D mode, otherwise the motors might go off with full power

Profile OSD profile name

Profile PID profile name

Profile rate profile name

Profile independent PID Controller Settings

terminal attack controller (TAC) (= forward air controller)

OSD profile name as set in the CLI variables

Set the expected video mode of the camera (typically this can be left on AUTO, if you have difficulties then set this to match the camera output)

flight controller (FC)

Beep when flight controller is powered from USB

Bind request sent to the flight controller

Flight controller info

Flight Controller Loop Time

flight controller software

flight controller's onboard dataflash chip

Flight controller firmware has to support this feature.

Loading current configuration from the flight controller

reconnect flight controller

The amount of available ESCs does not match what the flight controller is reporting

Welcome to Betaflight - Configurator, a utility designed to simplify updating, configuring and tuning of your flight controller

Your flight controller does not have a compatible dataflash chip available

Your flight controller does not have an integrated BetaFlight OSD

Your flight controller isn't responding to OSD commands

Your flight controller's firmware does not support Blackbox logging

Your flight controller's firmware does not support transponder functionality

Your flight controller's firmware is too old to support this tab

Set this option to X and your receiver will work with flight controllers

Set the values dispalyed on the post flight statistics screen

DoD IT Standards and Profile Registry (DISR)

interoperability profile

Unmanned Systems Interoperability Profile (USIP)