using the bootloader on the device

Rebooting device to bootloader FAILED

using an STLink programmer connected to the device

Bootloader mismatch!

Communication with bootloader failed

Contacting bootloader ...

flash the bootloader

initiating reboot to bootloader ...

No response from the bootloader, programming FAILED

call for fire using `snail` grid reference

anti-aircraft fire using fire control equipment

on the verge of using nuclear weapons

3D model generation using the 3D graphics editor

determination of bevel spatial orientation using the binary criterion

Battery/Amperage/Voltage configurations using API 1.33.0 (Betaflight release = 3.17) is not supported.

Fixed duty cycle level to be used when using sine mode

This method allows you to flash your module while it is connected to your transmitter by using the passthrough feature

Make sure you are using the latest firmware Betaflight X or newer

using cached builds information for ...

using cached information

Using cached release information for X releases

using degrees, minutes and seconds

Using Open Location Code (OLC)

using slot

When using the manual user-defined mode, the cloud binaries cache is disabled, resulting in much longer build times

safety and arming device / safety-and-arming device

air intake device / air-intake device

Reset device options to the recommended defaults on this device target. Except for your custom binding phrase

airborne surveillance device

ambush detection device

anti-countermining device

anti-fuse-removal device

anti-recovery device