Sends ESC data to the FC via DShot telemetry

Bidirectional Dshot / Bi-directional Dshot

Enable telemetry via switch

RPM frequency reported by ESC telemetry

RPM reported by ESC telemetry

Temperature reported by ESC telemetry

Different ESC firmware file, than in current ESC flash!

Outputs telemetry data on a 30ms interval

send telemetry data to the handset

Dshot Beacon Configuration

Bidirectional DShot

digital shot (Dshot)

Reverse the motors to flip over an upside down craft after a crash (DShot required)

Use Dshot beacon (use motors to sound beeps when disarmed)

track-via-missile (TVM) guidance

via point

via radio

combat-employable via air

via the radio

track via missile (TVM)

Configure via the Race Transponder tab after enabling

control via MSP port

Executing global chip erase (via extended erase) ...

Executing local erase (via extended erase) ...

Can be set via the ‘pilot_name’ CLI variable

Serial (via UART)

set via the CLI variable

via the Devices Firmware Upgrade mode

via its USB port or wiring up an FTDI device

Controls arbitrary output via PINIO

via channel

electronic data transfer / electronic data transmission ( EDT)

telemetry