Values above X might damage motor and/or ESC

Values above 0 will enable the RC pulse filter

Setting volume of the beacon too high might damage the motors

Setting volume of the startup beeps too high might damage the motors

Height Above Ellipsoid (HAE); altitude / elevation above the ellipsoid (ellipsoidal height)

Can Do, Will Do (ability - knowledge, skills, abilities, and willingness - values, motivations, and personality to do a job)

Read the release notes to understand what changed and what you might need to adjust

Different ESC firmware file, than in current ESC flash!

Set motor spin direction by selecting and spinning each motor individually

Flashing inappropriate firmware may damage your ESC

ESC/Motor Features

ESC/Motor protocol

3D ESC/Motor Features

ESC Motor 1

data might not have been written correctly

flashing might fail, especially on highly integrated AIOs

updating might fail

When you enabled 3D mode in your flight controller, make sure the ESCs are also set up for 3D mode, otherwise the motors might go off with full power

destroy material (values)

Copy Profile Values

Copy values from current profile to

Display at most 4 channels values

Dynamic Notch values change

Loaded default values for the current PID profile

Set the values dispalyed on the post flight statistics screen

Values limited to ...

Welcome to ESC - Configurator, a utility designed to simplify updating and configuring of your ESCs

above water warfare officer

echelon above corps (EAC)

echelon above brigade (EAB)

above field level (AFL)

hull above fender

above aerodrome level (AAA)